Post lift
A post lift is a lifting device which is typically used to raise vehicles inside buildings for easy repair and maintenance access. Most post lifts are above ground, but there are also in-ground varieties.
Contents |
[edit] Two post lift
This is the most commonly-used type of post lift. It consists of two upright columns, four adjustable arms attached to a carriage assembly, and two hydraulic cylinders. It is usually mounted to an existing concrete structure, at least 4 inches thick. Most are powered by an electric/hydraulic power unit.
The power unit delivers pressurised hydraulic fluid to the cylinders. A set of equalisation cables is installed between the carriages to ensure that all four arms move together. Automatic safety arm locks are designed to secure the lift arms, once the arm pads have been properly positioned under the vehicle.
[edit] Four post lift
This type of lift allows the vehicle to be driven onto two runways and lifted by its tyres. The advantage of this lift is that their is full access to the underside of the vehicle.
[edit] Drive-on parallelogram
This is a drive-on lift with two runways. The lifting mechanism can move the vehicle a short distance when lifting or lowering; or it can simply be lifted straight up and down. The two parallel runways are usually synchronised by hydraulic or electronic means; sometimes with a torsion bar connected to opposing legs.
[edit] Scissors
Surface-mounted and in-ground scissor lifts are available; either as a drive-on with runways or frame/body-engaging. It is similar to a parallelogram lift but raises and lowers the vehicle in a straight vertical path.
[edit] In-ground lift
This type of lift has its assembly installed below the concrete floor. One or more hydraulic pistons or scissors mechanisms can be used depending on the weight to be lifted.
[edit] Wheel engaging mobile units
Also known as a mobile column lift, this consists of individual lifting columns used in sets of 2, 4, 6, or more units. Each individual column is mobile and contains an electric power unit. Cables or wireless technology is used to synchronise the column lifting and lowering.
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
Scottish parents prioritise construction and apprenticeships
CIOB data released for Scottish Apprenticeship Week shows construction as top potential career path.
From a Green to a White Paper and the proposal of a General Safety Requirement for construction products.
Creativity, conservation and craft at Barley Studio. Book review.
The challenge as PFI agreements come to an end
How construction deals with inherited assets built under long-term contracts.
Skills plan for engineering and building services
Comprehensive industry report highlights persistent skills challenges across the sector.
Choosing the right design team for a D&B Contract
An architect explains the nature and needs of working within this common procurement route.
Statement from the Interim Chief Construction Advisor
Thouria Istephan; Architect and inquiry panel member outlines ongoing work, priorities and next steps.
The 2025 draft NPPF in brief with indicative responses
Local verses National and suitable verses sustainable: Consultation open for just over one week.
Increased vigilance on VAT Domestic Reverse Charge
HMRC bearing down with increasing force on construction consultant says.
Call for greater recognition of professional standards
Chartered bodies representing more than 1.5 million individuals have written to the UK Government.
Cutting carbon, cost and risk in estate management
Lessons from Cardiff Met’s “Halve the Half” initiative.
Inspiring the next generation to fulfil an electrified future
Technical Manager at ECA on the importance of engagement between industry and education.
Repairing historic stone and slate roofs
The need for a code of practice and technical advice note.
Environmental compliance; a checklist for 2026
Legislative changes, policy shifts, phased rollouts, and compliance updates to be aware of.